Table of Contents
Advertisement
Additional Functions (Continued)
Menu No.
Set value
22
E-
Checking the Temperature Compensation
Value under the Heating Mode
In order to check the temperature compensation value under
heating mode using the wired remote controller, hold down the
and
buttons at the same time for 5 seconds.
1
The menu will display .
Press the
button until is displayed.
2
Press the
button.
The setting compensation value of indoor temperature
during heating mode will be displayed.
Value
5°C (Indoor unit Dip switch K5: Off)
2°C [Indoor unit Dip switch K5: On (default)]
In case of 4 way/ mini 4 way cassette
Value
2°C (Indoor unit Dip switch K5: Off)
5°C [Indoor unit Dip switch K5: On (default)]
3
Press the
button to exit.
You will move to the menu selection display.
Note
Press the
without setting.
Data
Data
button anytime during setup to exit
Advertisement
Table of Contents
