Table of Contents
Advertisement
Additional Functions (Continued)
Menu No.
Set value
24
E-
Checking the Drain Pump Usage
In order to check the drain pump usage using the wired remote
controller, hold down the
time for 5 seconds.
1
The menu will display .
Press the
button until
2
Press the
button.
The drain pump usage will be displayed.
Value
Use (Indoor unit Dip switch K4: Off)
Not Use (Indoor unit Dip switch K4: On(default))
3
Press the
button to exit.
You will move to the menu selection display.
Note
Press the
without setting.
and
buttons at the same
is displayed.
Data
button anytime during setup to exit
Advertisement
Table of Contents
