Tracking Your Indoor Unit From The Wired Remote Controller - Samsung MWR-SH00N Installation Manual

Wired remote Controller Installation

tracking Your Indoor Unit from the Wired remote Controller

Displays the total number of units searched
1. Tracking of your Wired Remote Controller will automatically start when you turn on the power after installation.
2. If you want to perform tracking again after installation, then press the [
than five seconds.
- The system will reset, and tracking will start again.
3. During tracking, the total number of currently searched indoor units will be displayed.
4. It may take about 5 minutes at initial installation or when you re-set the Master setting.
• If you want to perform tracking again after installation, then press the [
for more than five seconds.
CaUtION
SOL WRControl_IM_04148A-00_EN.indd 8
Indicates tracking in
progress
] and [Set] buttons at the same time for more
] and [Set] buttons at the same time
ENGLISH-8
2013-09-25 오전 10:29:08