Table of Contents
Advertisement
Question
Other
The controller holder is unsteady.
The displays of the operation or
position seem to be different ...
The noise grows louder after
using the chair for a long time.
Is there a timer function?
How to connect and use
Bluetooth audio of the massage
lounger?
The switch button fails to work.
The indicator does not light up
but there is sound.
How to connect the power cord
connector?
Tighten the controller holder fixing screw.
The holder is held tighter by turning the mounting screw in the direction of
●
Controller holder cannot be completely secured in order to allow
adjustment to desired positions and orientations.
The actions shown represent rough movements.
Actual movements or sensations may vary.
This may be a malfunction. Contact the nearest authorized service
center for an inspection and repair.
Yes.
To prevent overuse, the massage automatically ends at a maximum of
30 minutes after starting. (EN38)
When the timer runs out, the backrest and legrest return automatically and
the massage roller moves to the bottom and stops in the stowed position.
If the backrest and legrest angle is set to "Leave in place" in the
settings, the backrest / legrest will not return. (EN37)
To use again, press
.
When using the massage lounger for the first time, turn on the mobile
phone and open the Bluetooth to search for the massage lounger model
[EP-MAN1-XXXXXX], and correctly enter the Bluetooth password: 1316
Select the music playing.
ㅡ If you have used the Bluetooth audio playback function of the
■
massage lounger, turn on the Bluetooth of the mobile phone. It will
automatically connect to the Bluetooth audio of the massage lounger,
and select the music playing.
ㅡ Check if the massage lounger is powered on.
■
ㅡ Check if nanoe
■
®
X relay line is connected.
ㅡ If there is still any abnormality after confirmation, the switch assembly may be damaged.
■
→ Contact an authorized service center for inspection and repair immediately.
■
The indicator components may be the damaged. If necessary, contact
an authorized service center for inspection and repair.
Insert the power cord
connector into the
power supply relay line.
Power supply
relay line
Answer
Controller holder
Controller holder fixing screw
Power cord
.
EN47
Advertisement
Table of Contents
