Panasonic EP-MAN1 Operating Instructions Manual page 33

Settings & adjusting method
●
This may not be accepted if selected when an operation is switching to another operation.
●
is displayed during repeat.
●
The number of repetitions is the same whether pressed once or pressed twice or more times.
●
This may not be accepted if selected when an operation is switching to another operation.
ow Medium
Press "OK".
Press "X" (Close)
●
Pressing "-" or "+" will not accept adjustments while strength display is blinking.
High Highest
●
Refer to descriptions provided on EN46 for instructions when the highest
intensity setting is not strong enough or when the lowest intensity setting is too
strong.
●
The adjustment may not be accepted if selected when an operation is switching
to another operation.
Selecting and pressing "OK" will perform one stretch operation that has been newly set to
"On".
Stretching operation with the setting "On" is also performed during the course.
●
When a user registers, the settings are memorized for each course. (EN24)
●
When multiple operations are newly set to "On", the order in which they are performed
cannot be set.
●
The timing of the stretching operation cannot be set during the course.
●
See EN29 for details of stretch actions.
※ If the setting "On" is made during the course, it may not be performed depending on
the progress of the original course operation.
Press to perform adjustments when adjusting positions of rollers for an ongoing
motion.
●
The maximum number of adjustments per operation is 3 per direction.
●
When "Beep-beep-beep" is heard, no further adjustment is possible.
●
Adjustment may not be possible depending on the place where the massaging is being
made.
※
Continued on the next page
EN33