Table of Contents
Advertisement
Setting and canceling the child lock
If this setting is made, the operations are no longer accepted.
■ How to set
Long press
for about 5 seconds when the power supply of the controller is turned OFF or when the user
selection / registration screen is being displayed.
●
The following screen is displayed,
and about 10 seconds later the power
is switched OFF automatically.
■ How to cancel
After the child lock is set, press and hold
is shown or when the power of the controller is turned OFF.
Toggle part display
The display of part can be toggled between upper body and
whole body.
●
During program editing, part display cannot be toggled.
(EN27)
Press
Press
Display of the operation, position, and pressure
The statuses of massage rollers in operation, as well as sole
and air are displayed.
(The actions shown represent rough movements. Actual
movements or sensations may vary.)
Massage rollers
●
Air (Example: In case of air arm course)
Sole
ㅡ
rotates during
operation.
●
When
later the supply to the controller is switched OFF automatically.
for about 5 seconds when the screen display described above
The color becomes darker as
the pressure on the massage
rollers becomes higher.
Setting of air: Off
Setting of air: On
Air operating
The color of the
body part changes
continuously.
is pressed after the setting is made, about 10 seconds
Display reclining angle adjustment screen
The angle of the backrest and legrest can be
adjusted at any time by pressing
●
When the button is pressed, a "Beep"
confirmation sound is heard and the unit
moves one step at a time.
●
Press and hold to keep it moving until you
hear a "Beep-beep-beep" sound.
●
If you select only those areas where only air
operates, the screen below will be displayed.
(See EN30 for air massage operations.)
.
Press
Arm/Leg/Sole
actions
Operation Off/On,
hard/gentle display
(EN34 to EN35)
EN19
Advertisement
Table of Contents
