5
Check for misaligned screw holes
and secure with mounting screws
Screw holes
Attachment
screws
6
Attach the left hand side in the
same way
7
Attach the controller to the controller holder
The controller stand and controller holder cannot be replaced with the left armrest.
① Insert the controller cord
into the recess of the
controller holder
② Align the groove on
the back of the
controller horizontally
with the convex part
of the controller holder
and slide it into place
8
Attaching the pillow
Attach the pillow using the velcro fastener.
Recommended position of the pillow when using the massage lounger. (EN16)
The one with
the tag is
higher
9
Attaching the comfort cushion
Attach the cushion using the fastener.
●
When the Comfort cushion is attached, the chair can be used as a chair.
Fastener
Comfort cushion
Concave part
Controller cord
Groove
Back side of
controller
Convex part
Velcro fastener
Up
Down
Pillow
■ How to tighten
the screws
① Place the screw on the tip of
a allen key.
② Tighten the screw while
ensuring that the screw hole
and the screw head become
flat.
●
Screw may be damaged
if you tighten the screw
inserted into the hole
crookedly using an allen key.
③ Push it in until it clicks
into place
◦ To remove the controller, lift it up.
Velcro fastener
Allen key
EN13