Table of Contents
Advertisement
Always check the fabric covering the backrest or legrest movable parts has not been ripped before using the
unit. Please also check other areas to ensure the fabric has not been ripped. No matter how small the rip, if you
find one then immediately stop using the unit, unplug the power plug and have the unit repaired at an authorized
service center.
(Otherwise it may lead to injury or electric shock.)
Check the surrounding area
●
Make sure there are no objects, persons, or pets in the vicinity of the unit.
The massage lounger may not work when pets such as dogs and cats chew on or trip over the
controller cord.
(This may result in a breakdown.)
●
Are there any tears in the fabric of the body or sole cover?
●
Are there foreign objects sandwiched in the main unit?
●
Are the massage rollers in their stowed positions?
ㅡ When the massage rollers are not in the retracted position
Press twice
to return the massage rollers to the retracted position.
●
Is the legrest in the fully lowered position ( fully lowered position means the legrest is touching the floor)?
ㅡ When the legrest is not fully lowered
The legrest will lower by pressing
<About the sole cover>
●
Due to the characteristics of the fabric used for the sole cover, the fabric may be crushed or
partially whitened by repeated use.
( You cannot restore it to its original state even after washing it, which does not affect its use.)
●
If you are concerned about creases, please iron it. (EN40)
Turn on the power
①
Insert the power plug into the power outlet.
●
Always be sure to insert into an AC 220 V plug.
②
Set the power switch on the back of the
main unit to "I" (On)
WARNING
on twice.
AC 220 V
①
②
I (On)
Continued on the next page
EN15
Advertisement
Table of Contents
