Battery Replacement - Master R 09 User Manual

UP: 1. Increase the setting value of the following functions.
Sex-Height-Weight-Age-Time-Distance-Calorie-Pulse
2. Select function and display on the main screen during exercise.
Scan-Time-Speed-Distance-Calorie-Pulse
DOWN: 1. Decrease the setting value of the following functions.
Sex-Height-Weight-Age-Time-Distance-Calorie-Pulse
2. Select function and display on the main screen during exercise.
Scan-Pulse-Calorie-Distance-Speed-Time

BATTERY REPLACEMENT

 Please install 2 pieces of AA or UM-3 batteries in the battery case on the back of monitor.
 Ensure that the batteries are correctly fitted. Battery must be correctly positioned and make sure the
battery spring is properly contacted with battery.
 If the display appears blank or display only partial segment, remove the batteries and wait 15 seconds,
then replace.
Whenever remove batteries, all the functions values will be reset to zero.
5. The batteries must be removed from the appliance before it is scrapped and that they are disposed of
safely.
FUNCTIONS AND OPERATIONS
AUTO ON/OFF
The monitor will wake up automatically if the exercise machine is in motion. If stop exercising for over 4
minutes, monitor will turn off and reset all function values to zero.
SCAN
Press the button of UP or DOWN until the dot of scanning flash on the screen. Monitor will display the
following function and each function will keep 6 seconds on the main screen.
Time-Speed-Distance-Calorie-Pulse
TIME
Press the button of UP or DOWN until the dot of TIME display on the screen. Monitor will display the
Time function on the main screen. If you want to setup the value, please press the button of
ENTER/RESET to TIME function and press the UP or DOWN button to enter the value you want.
Count up:
Without setting the time value, the monitor will count up the time from 00:00~99:59.
Count down:
Setting the exercise time from1:00~99:00 minutes, the monitor will count down from your setting values.
Once reach setting value, monitor will alarm.
SPEED
Press the button of UP or DOWN until the dot of SPEED display on the screen. Monitor will display the
current speed on the main screen. The monitor will display the current speed from 0.00~99.9 Km or Mile.
DISTANCE
Press the button of UP or DOWN until the dot of DIST display on the screen. Monitor will accumulate
the distance trip. If you want to setup the value, please press the button of ENTER/RESET to DIST and
press the UP or DOWN button to enter the value you want.
Count up:
Without setting the distance value, the monitor will count up the distance from 0.1~999.9Km or Mile.
Count down:
Setting the exercise time from 1.0~999.0 Km or Mile, the monitor will count down from your setting
values. Once reach setting value, monitor will alarm.
56 5
6
EN