Chapter 7: Procedure Call; Example: Configuring A Service With The Phone Call Function - Avaya 375 Series Using Manual

Chapter 7: Procedure call

When configuring the functions Call services, In call menu, Contacts, or a shortcut or service to
the Phone call function, the data added in these functions is static. When entering the data for the
function to be used, you can add a variable or character U. This variable configuration enables the
user to enter additional numerical characters before calling the number or sending the data to a
system.
Note:
The Call service and In call menu features require configuration through WinPDM or Device
Manager.
Example: Configuring a service with the Phone call
function
About this task
A user wants to create a service with the Phone call function. The PBX requires that a prefix must
be added to a phone number. In this case, the user can pre-program the prefix and enter the
applicable phone number when using the Phone call function.
Procedure
1. Press Menu.
2. Select My favourites.
3. Select Add new.
4. In the Name field, enter Call no and press OK.
5. Select the function Phone call.
6. In the Number field, enter the prefix to be used followed by the character U.
In this example, the text string is as follows: *21*U
The character U represents an Enter number dialog where the user can enter the phone
number.
7. Press Save.
August 2023 Using Avaya Wireless Handset 375x
Comments on this document?
106