Enabling Bluetooth; Pairing And Connecting A Bluetooth Headset - Avaya 375 Series Using Manual

The handset supports the Bluetooth 2.0 standard. Other headsets may also work, though they
have not been verified by Avaya.
Note:
Your Bluetooth headset may have more or less functions than described here.

Enabling Bluetooth

Procedure
1. Press Menu, or the confirmation button on the navigation key.
2. Select Connections.
3. Select Bluetooth.
4. Select Enable. A Bluetooth connection ( ) icon is displayed in the header bar.
Note:
To disable Bluetooth again, select Disable. The cordless Wireless Handset 3749
restarts when you enable or disable the Bluetooth option.

Pairing and connecting a Bluetooth headset

About this task
To use a Bluetooth headset, pair it first with the handset. You only need to pair the Bluetooth
headset once.
The handset automatically connects with a paired headset when it is in the range. The
front of a headset name indicates an established connection.
If the connection with a headset is lost, the handset tries to reconnect. The pause between
attempts starts from 1 second then it increases after each failed attempt by 1 second. After
approximately10 minutes, the pause between attempts reaches 30 seconds and does not
increase more. If a connection is not restored within 2 hours, the handset stops the reconnecting
process.
Procedure
1. Place the Bluetooth headset and the handset next to each other.
2. Set the Bluetooth headset in pairing mode.
3. On the handset, enable Bluetooth.
4. On the handset, select Connections > Bluetooth > Headset > Add new.
The handset displays the Put headset in Pairing mode message.
August 2023 Using Avaya Wireless Handset 375x
Comments on this document?
Enabling Bluetooth
icon in
125