Avaya 375 Series Using Manual page 93

Setting different ring signals for calls
About this task
Use this procedure to set different ring signals for calls.
The handset has 14 different ring signals.
Procedure
1. Press Menu.
2. Select Settings.
3. Select Sound & Alerts > Ring signals.
4. Select one of the following:
• Internal call
• External call
• Call back
• Priority call
5. Select the ring signal.
6. (Optional) Press Play to listen to a ring signal before selecting it.
The ring signal is repeated until you press Stop.
7. Press Back to save the settings.
Note:
If the "Force stimuli ringing parameter is enabled, the handset uses the system-
provided ring signals instead of the local ring signals. This function is applicable in
legacy systems only (stimuli).
Setting alerts for messages
Procedure
1. Press Menu.
2. Select Settings.
3. Select Sound & Alerts > Message alert.
4. Select a message alert from the list.
Press Play to listen to a message alert before selecting it.
Note:
The Play soft key is not available for Enhanced beep. Instead, send a message to the
handset to listen to the sound.
By default, the message volume follows the ring volume setting in the handset. However,
you can set the message volume to be different.
August 2023 Using Avaya Wireless Handset 375x
Comments on this document?
Settings
93