Avaya 375 Series Using Manual page 67

Procedure
Do the following:
• Press More > DTMF > Select.
• Press the On-hook and On/Off (
button.
DTMF is visible only when it is configured in the handset.
DECT Info
DECT info is an advanced function intended for an administrator using the handset to measure the
RF link and system parameters as part of a troubleshooting or site survey procedure.
This option is only visible if the Admin menu is activated.
Sending data
About this task
Sent data can be used to initiate actions such as:
• Opening a door.
• Starting and stopping a machine.
Procedure
To send user entered data from the handset, do any of the following:
• Press pre-programmed hot key.
• Press pre-programmed soft key.
• Select a service.
The data can either be predefined, entered after the hot key or soft key is pressed, or send
when the relevant service is selected.
Using the loudspeaker
About this task
Use this procedure to activate the loudspeaker.
Procedure
Do one of the following:
• Press a multifunction button, soft key, hot key, or navigation key defined as the shortcut to a
Phone call ( ) function. When you press the key or button, the handset calls a predefined
number using the loudspeaker.
The support for a multifunction button depends on the handset model.
• When receiving a call, press the
depending on its configuration of the In call function in WinPDM or Device Manager.
August 2023
) key, and then press and release the Sound off (
soft key. The soft key can have another or no function
Using Avaya Wireless Handset 375x
Comments on this document?
Calls
)
67