Parts Of The 375X Handset - Avaya 375 Series Using Manual

Avaya Wireless Handset 375x overview
14 Multifunction button 1
15 Volume buttons
16 3.5-mm connector
17 Earpiece speaker

Parts of the 375x handset

Important:
The handset can retain small magnetic objects around the microphone or the speaker region.
Parts on the
Handset
Case
Antenna
Loudspeaker
August 2023
Description
The plastic cover parts are made of durable PC/ABS material.
The antenna is integrated inside the handset.
The handset has a separate loudspeaker for the alerting and hands free function. The
loudspeaker is located at the back of the handset.
Using Avaya Wireless Handset 375x
Comments on this document?
By default, it is used as the Mute button. In Idle
mode, you can switch the audible signals on or off
with a long press.
The ring signal at incoming calls can be silenced
with a single press, and the microphone can be
turned on or off during calls.
This button can be configured to perform various
functions.
Note:
Only long press in Idle mode can be
configured to a different function.
Is used to increase or decrease the speaker, and
ringtone volume.
Standard or Screw-enforced connector is use to
connect a headset or charge the handset.
Note:
Out of the box, it is protected against dust
by the connector cover. The cover must be
unscrewed to use the connector.
Note:
The connector is compatible with wired
headsets used for Android.
Is used in voice communication.
Table continues...
24