Printing On Specialty Media; Printing Transparencies; Printing Custom Size Or Long Paper - Xerox Phaser 6180MFP User Manual

Printing on Specialty Media

This section includes:
■

Printing Transparencies

■ Printing Envelopes on page 5-28
Printing Labels on page 5-31
■
■ Printing Glossy Paper
■

Printing Custom Size or Long Paper

Printing Transparencies
Transparencies can only be printed from Tray 1 (MPT). They should be printed on one side
only. For best results, use only recommended Xerox transparencies.
To order paper, transparencies, or other specialty media, contact your local reseller or go to
www.xerox.com/office/6180MFPsupplies.
Caution: Damage caused by using unsupported paper, transparencies, and other specialty
media is not covered by the Xerox warranty, service agreement, or Total Satisfaction
Guarantee. The Total Satisfaction Guarantee is available in the United States and Canada.
Coverage may vary outside these areas; please contact your local representative for details.
See also:
Recommended Media List (North America)
Recommended Media List (Europe)
Guidelines
Remove all paper before loading transparencies in the tray.
■
■ Do not load more than 25 sheets in Tray 1 (MPT). Overloading the tray may cause the
printer to jam.
■ Handle transparencies by the edges using both hands to avoid fingerprints and creases,
which may cause poor print quality.
■ Fan transparencies before loading in the paper tray.
This section explains how to print on transparencies.
on page 5-25
on page 5-36
on page 5-41
Phaser® 6180MFP Multifunction Printer
5-25

Printing on Specialty Media