Image Placement Adjustments - Xerox Phaser 6180MFP User Manual

8.
Press the OK button to accept the new setting.
9. You can select another color and adjust it's density, or press the Exit button to leave this
portion of the menu.
To adjust the Color Balance default setting, see
page 6-5.

Image Placement Adjustments

You can change the following image placement adjustment settings:
Printing Multiple Images on a Sheet (N-Up)
■
■ Printing Posters on page 6-10
■ Repeating Images on a Sheet
■ Centering the Image
Setting the Copy Margins
■
Printing Multiple Images on a Sheet (N-Up)
You can copy two original page images onto one side of a sheet of paper. The size of the
images are reduced proportionally to fit on the selected paper.
To select the N-Up option:
1. On the control panel, press the Copy button.
2. Select , and then press the OK button.
N-Up
3.
Select one of the following options, and then press the OK button.
Off
Auto
ID Copy
Manual
4. Press the Start button to begin copying.
Selecting the Default Copy Settings
on page 6-9
on page 6-10
on page 6-10
on page 6-11
Copies one original page image onto one side of a sheet of paper.
Copies two original pages, reduces the images, and prints them on one
side of a sheet of paper.
Copies two original size images onto one side of a sheet of paper.
Reduces the two original images as specified in Reduce/Enlarge, and
prints them on one side of a sheet of paper.
Phaser® 6180MFP Multifunction Printer
6-9
Adjusting Copying Options
on