Xerox Phaser 6180MFP User Manual page 93

Printing on Envelopes
When MPT Mode is set to Panel Specified, you need to set the paper type and size settings
for the tray on the control panel in advance. See
The way to display the printer Properties dialog box differs according to the application
software. Refer to the manual of your respective application software.
Using the PostScript Driver
To print on envelopes using the PostScript print driver, display the Paper/Output tab.
1. From the File menu, select Print.
2. Select this printer as the printer to be used and click Preferences to display the Properties
dialog box.
3. Select the Paper/Output tab.
4. From Paper Tray, select Tray 1 (MPT).
5. From Paper Type, select Envelope.
6. From Paper Size, select the size of the original document.
7. Click OK, and then Print.
Using the PCL Driver
To print on envelopes using the PCL print driver, display the Paper/Output tab.
1.
From the File menu, select Print.
2.
Select this printer as the printer to be used and click Preferences to display the Properties
dialog box.
3.
Select the Paper/Output tab.
4.
From Paper Tray, select Tray 1 (MPT).
5.
Select the appropriate paper type from Tray 1 (MPT) Paper Type.
6.
From Paper Size, select the size of the original document.
7.
Click OK.
8.
Click Print in the Print dialog box to start printing.
Setting Paper Types and Sizes
Phaser® 6180MFP Multifunction Printer
5-30
Printing on Specialty Media
on page 5-9.