Adjusting Copying Options; Basic Settings - Xerox Phaser 6180MFP User Manual

Adjusting Copying Options

This section includes:
■

Basic Settings

on page 6-3
■ Image Adjustments on page 6-6
Image Placement Adjustments
■
■ Output Adjustments
Basic Settings
You can change the following basic settings when making copies:
■ Selecting Color or Black and White Copies
Selecting a Tray to Use for Copies
■
■ Selecting the Default Copy Settings
■ Specifying 2-Sided Copies
■ Selecting the Default Copy Settings
Selecting Color or Black and White Copies
You can create copies in color or in black and white.
1.
Press the Copy button.
2.
Press the Color Mode button on the control panel to change the selection to Color or
B & W (Black &White).
Note: The Color Mode will return to the default setting after the Copy job is complete. To
set the default behavior permanently, see
on page 6-9
on page 6-12
on page 6-3
on page 6-4
on page 6-5
on page 6-5
on page 6-5
Selecting the Default Copy Settings
Phaser® 6180MFP Multifunction Printer
6-3
Adjusting Copying Options
on page 6-5.