Advanced Copying; Collating (Sort) Copying; 2-Sided Copying - Xerox Phaser 6121MFP User Manual

Advanced Copying

Advanced copy settings include collating sets of copies (sorting), printing multiple pages per sheet,
printing on both sides of the paper, and special copy modes such as copying ID cards, Clone Copy, and
Poster Copy.
This section includes:
•

Collating (Sort) Copying

•

2-sided Copying

on page 81
• Printing Multiple Pages per Sheet (2-Up)
• Using Special Copy Modes
Collating (Sort) Copying
Note: The Collate option is not available with the Phaser 6121MFP/S printer configuration.
When making several copies of a multi-page document, you can sort the output into sets. For example,
if you are making three single-sided copies of a six-page document, the copies are printed in the
following page order when you select Collate: On.
1, 2, 3, 4, 5, 6, 1, 2, 3, 4, 5, 6, 1, 2, 3, 4, 5, 6
Note: You can produce collated output whether using the auto document feeder or making copies
from the document glass.
With the Collate setting off, the copies are printed in the following page order:
1, 1, 1, 2, 2, 2, 3, 3, 3, 4, 4, 4, 5, 5, 5, 6, 6, 6
To enable collation:
1. On the printer control panel, press the Copy button.
2. Press the Down Arrow button to go to Collate.
3. If the setting reads "Collate: Off" press the OK button and then press the Up Arrow button to go to
On and press OK.
2-sided Copying
This section includes:
• 2-sided Copying from the Auto Document Feeder
• Manual 2-sided Copying from the Auto Document Feeder
• 2-sided Copying from the Document Glass
Note: The optional duplex unit must be installed for this feature to be available
(Phaser 6121MFP/D printer configurations only).
You can make 2-sided copies using the auto document feeder or the document glass.
on page 81
on page 84
on page 86
on page 83
on page 82
on page 83
Phaser 6121MFP Multifunction Printer
Copying
81
User Guide