Xerox Phaser 6121MFP User Manual page 157

Menu Item
Receive Print
Receive Mode
Forward
Footer
Select Tray
Reset to Default?
Description
• Memory Receive (default): The fax prints after the entire transmission
has been received. Note that this setting is separate from the Memory
Receive menu item at the beginning of the Receive Option Menu.
• Print Receive: The fax begins printing as soon as the first page has been
received.
• Auto RX (auto receive): The printer always answers an incoming call as
a fax.
• Manual Receive: The line continues to ring until you start the receive
fax function manually.
• DRPD (Distinctive Ring Pattern1, Pattern2, Pattern3, Pattern4): The
printer determines from the ring pattern if the call is a voice phone call
or a fax.
Specifies whether the printer should forward incoming faxes to a specified
destination and whether to print before forwarding.
• On: Faxes received will be forwarded to the specified fax number or
email address.
• On (Print): Faxes received will print out and then be forwarded.
• Off: Faxes received will not be forwarded.
• On: Fax reception information is printed at the bottom of the printable
area (footer) of the fax.
• Off: Fax reception information is not printed in the footer.
Specifies which paper tray the printer uses for printing faxes. (Selection is
not possible if there is only one tray.)
• Tray 1
• Tray 2 (Option for Phaser 6121MFP/N or /D printer configurations only.)
When selected, resets the Receive options back to their original factory
defaults.
Control Panel Menus
Phaser 6121MFP Multifunction Printer 157
User Guide