Copy Default Setup Menu - Xerox Phaser 6121MFP User Manual

Menu Item
Special Copy Mode
Copy Default
System Menu

Copy Default Setup Menu

Menu Item
Paper Default
(Phaser 6121MFP/N and /D
printer configurations with the
optional 500-sheet feeder
installed.)
Original Doc Type
Lighten/Darken
Collate Default
(Phaser 6121MFP/N and /D
printer configurations only.)
Sides Default
(Phaser 6121MFP/N and /D
printer configurations only.)
Contents
• ID Copy: Used for copying ID cards. The back and front of a document
are copied at full size onto one side of a single sheet of paper.
• None (Normal Copy)
• Poster Copy: The length and width of the copied document are each
enlarged 200% and are printed on four pages.
• Clone Copy: Repeat copying; used to copy small documents multiple
times onto one piece of larger paper.
• Paper Default
• Original Doc Type
• Lighten/Darken
• Collate Default
• Sides Default
• Preset Units
For details, see Copy Default Setup Menu
Provides accesses to the System Menu.
Function
Specifies the default tray to use as the paper source for copies. If you do
not have Tray 2 installed (optional only for Phaser 6121MFP/N and /D
printer configurations), this setting will not be available.
Specifies the type of content being copied from the original document:
• Mixed, Fine/Mixed: Text with images/photos.
• Photo, Fine/Photo: Photos only.
• Text, Fine/Text: Text only.
Specifies how light or dark the resulting copied image should be (also called
"copy density").
Specifies whether copy sorting is on or off.
• Off: Double-sided copying is off.
• Long Edge Flip: Copied pages are printed so that they flip over along
the long edge of the paper.
• Short Edge Flip: Copied pages are printed so that they flip over along
the short edge of the paper.
Control Panel Menus
on page 147.
Phaser 6121MFP Multifunction Printer 147
User Guide