Faxing
Changing the Default Fax Job Settings
Fax default job settings include Auto Redial, fax COMM settings, fax regional settings, send and receive
options, and fax reports. For an explanation of each default setting, see
page 154.
To change the default fax job settings:
1. On the printer control panel, press the Fax button.
2. Press the Down Arrow button to go to Fax Default Setup and then press the OK button.
3. Use the Up Arrow or Down Arrow buttons to select the setting you want to change, then press OK.
4. Change the setting, press OK, and then, to exit the menu, you can press the Stop/Reset button or
the Back/Menu button.
Note:
The Fax COMM, Send Options, and Receive Options menu settings can be reset to their
factory defaults. Just select the menu, arrow down to Reset to Default? and press OK.
See also:
Changing the Default Fax Send Options
Changing the Default Fax Receive Options
130
Phaser 6121MFP Multifunction Printer
User Guide
on page 123
on page 129
Fax Default Setup Menu
on