Job Assembly Feature; Job Assembly Feature Overview; Build Job - Xerox Versant 180 Press User Manual

Press Apps
Review the following information before using the Folding option.
• If your press is equipped with an optional Folder, you can make copies or prints using
the Folding feature.
• Depending on the finishing device, the Folding option can fold your output in half
(single or bi-fold) or in thirds (C-fold or Z-fold types).
• The Folding option can be selected for both your copy and network print jobs.
• Depending on the copy/print job, the Folding option can be selected from either the
press UI or from the print driver on your workstation.
• The Folding option can also be selected at the print server for the selected job.
• In order to use the folding option, the orientation of documents must be short-edge
feed (SEF). You must select a paper tray that contains SEF stock.
Folding options include:
• Single Fold (Bi-Fold): Select this option to fold the output copies in half.
• C-Fold: Select this option to fold the output copies in thirds.
• Z-Fold: Select this option to fold the output copies with two folds that are folded in
opposite directions, resulting in a type of fan fold.
• Z-Fold Half Sheet: This option has two folds that are folded in opposite directions,
with two unequal folds. The two unequal folds allow one edge of the sheet to have
a longer edge which allows for stapling or hole punching.
• Image Inside Fold: Folds copies so that the image is printed on the inside.
• Images Outside Fold: Folds copies so that the image is printed on the outside.

Job Assembly Feature

Job Assembly Feature Overview

Job Assembly includes the following features:

• Build Job

• Sample Job
• Combine Original Sets
• Delete Outside / Delete Inside
Build Job
This feature allows you to change and save settings individually for each document
page or stack. You can then make copies of documents with different settings as one
job.
1. Split the hard-copy document into sections for individual programming.
2. On the Home window, select Copy.
3. Select the Job Assembly tab.
4. Select Build Job.
5. Select Build Job On.
6. Select Save.
3-26
® ®
Xerox Versant 180 Press
User Guide