Table of Contents
Advertisement
3- Screen Size Changing
●
To change the screen image/projected image size
appearing on the screen
[PC Input Signal]
If you set the resolution other than recommended resolution on the monitor, the
monitor shows the image automatically enlarged on the whole screen. The
<Screen Size> menu allows you to change the screen display size.
Settings
Full Screen
Displays an image in full screen. Images are distorted in some
cases because the vertical rate is not equal to the horizontal
rate.
Enlarged
Displays an image in full screen. In some cases, a blank
horizontal or vertical border appears to equalize the vertical
rate and the horizontal rate.
Displays images with the specified resolution.
Normal
Ex.: 1280 × 1024 display
Full Screen
(default setting)
(1920 × 1200)
(1500 × 1200)
[Procedure]
(1) Choose the <Screen Size> icon in the Setting menu and tap the slide bar.
The <Screen Size> menu appears.
(2) Trace the slide bar left and right to select either "Full Screen", "Enlarged",
or "Normal" and tap the slide bar.
The screen size setting is completed.
[VIDEO Input Signal]
The screen display size is automatically changed according to the aspect
information from the input signal of an AV equipment (Auto Screen Size).
However, the screen size may be changed manually in the <Screen Size> menu.
Settings
4:3
Displays the image in 4:3 size. The borders are shown on both
sides of the screen. 16:9 sized images from the input signal
are compressed horizontally and spread vertically.
Letterbox
The black borders on the upper and lower sides of the
image are cut and the images are displayed on the whole
screen. Except for Letterbox, the upper and lower parts of the
projected image are cut.
16:9
Displays the image in 16:9 size with the left and right parts of
the projected image slightly cut off.
In this mode, 4:3 sized image from the input signal are slightly
compressed vertically and spread horizontally.
16:9 Full
Displays the entire image in 16:9 size on the whole screen
without cutting any part. The borders appear on the top and
bottom sides of the screen.
(Selectable only when receiving 1080i/720p/1080p input
signal)
[Screen Size]
Status
Enlarged
Normal
(1280 × 1024)
Status
NOTE
• If you do not want to change the
screen display size automatically,
set the <Auto Screen Size> in
the <Monitor Settings> menu to
"Disable".
Chapter 3 Settings and Adjustment
31
Advertisement
Table of Contents
