Adjust Ing T He Display And The Warnin G; Tones; Error Messages - Audi R8 2017 Owner's Manual

Parking systems
Adjusting the display
and the warning tones
The display and warning tones can be adjusted in
the Infotainment.
""Select in the Infotainment system:
IMENU I
but-
ton >Ve hicle > left control button >Driver as-
sistance > Parking aid.
Warning tones
Front volume - volume for the front area
Rear volume -
volume for the rear area
Entertainment fader - when the parking system
is turned on, the volume of the audio/video
source is lowered.
The newly selected level is demonstrated briefly
by the sound generator.
(D
Tips
The settings are automatically stored and as-
signed to the remote control key that is in
use.
Error messages
Front parking aid: malfunct ion! Obstacles can-
not be detected
Parking aid: malfunction! Obstacles cannot be
detected
There is a system malfunction if the LED in the
Pw , button blinks when sw itching on the system.
If the error is not corrected before you switch off
the ignition, the LED in the Pw i button will blink
the next time you switch on the parking system
by shifting into reverse. As long as the error is ac-
tive, you can display the e rror messages in the
second tab of the drive r information system.
Parking system plus*
If a sensor or speaker is faulty, the!¾: symbol
will appear in front of/behind the vehicle in the
Infotainment display. If a rear sensor is faulty,
only obstacles that are in areas (!) and @
c::>
page 77, fig. 70 are shown. If a front sensor is
fau lty, only obstacles that are in areas @ and @)
are shown .
80
Drive to an authorized Audi dealer or authorized
Audi Service Facility immediate ly to have the
malfunction corrected.