On-Board Diagnostic System (Obd) - Audi R8 2017 Owner's Manual

CD
CD
...
N
"
N
...
0
0
"'
'SI'
lights on and off using the light switch . You can
still control all wiper functions that are inde-
pendent of the ra in sensor.
Drive to an authorized Aud i dealer o r authorized
Audi Service Facility immediately to have the
malfunction corrected.
; Damper control
Appl ies to: vehicles with Audi drive select
R
Suspension: malfunction! You may continue
driving
There is an adaptive damper malfunction.
Drive to an authorized Aud i dealer or authorized
Aud i Service Facil ity immediately to have the
malfunct ion cor rected.
I-:
All wheel drive
Ill
All-wheel drive: malfunction! You may con-
tinue driving. Please contact Service
There is a malfunction in the all wheel dr ive.
Drive to an authorized Aud i dea ler or authorized
Audi Service Facility immediately to have the
malfunction corrected .
. Ill
All-wheel drive: too hot. Please adapt driv-
ing style. See owner's manual
The all wheel drive temperature has increased
significantly due to the sporty dr iving manner .
Drive in a less sporty manner until the tempera-
ture returns to the norma l range and the indica-
tor light switches of.
¢i
9
Turn signals
If the
B
o r
Ill
indicator light blinks, a turn sig-
nal is turned on. If both indicator lig hts are blink-
ing, the emergency flashers are on.
Instruments and indicator lights
On-Board Diagnostic
system (OBD)
System indicator light (MIL)
The system indicator light (MIL)
¢4
in the instru-
ment cluster is part of the On Board Diagnostic
System (OBD II).
The warning/indicator light turns on when the ig-
nition is switched on and turns off once the en-
gine is started and is running in idle at a stable
speed. This indicates that the MIL is functioning
correctly.
If the light does not turn off after starting the
engine or turns on while driving, this may ind i-
cate there is a malfunction in the engine. If the
indicator turns on, the catalytic converter may be
damaged .
Drive with reduced engine performance (avoid
high speeds for extended periods of time and/or
fast acceleration) and have the malfunction cor-
rected . See an author ized Audi dealer or author-
ized Audi Service Facility.
On-Board Diagnostics
Fig. 4 Locat ion of Data link Connecto r {DLC)
On-Board Diagnostics monitors the components
of your emission control system. Each monitored
component in your engine system has been as-
signed a code. In case of a malfunction, the com-
ponent will be ident ified and the fault sto red as a
code in the control modu le memory.
The MIL light may also illuminate if there is a
leak in the on-board fuel vapor recovery system . .,.
17