Adjusting The Display And The Warning Tones; Error Messages; Trailer Hitch - Audi A6 2016 Owner's Manual

Table of Contents

Advertisement

Adjusting
the display
and the warning
tones
Appl ies to vehicles: W it h parkin g system plus/ rearview cam ·
era/peripheral cameras
The display and warning tones can be adjusted in
the Infotainment.
~ Select: the
ICARI
function button > (Car)* Sys-
tems control button > Driver assistance
>
Park-
ing aid .
Display
On* - An opt ical display is shown for t he parking
system plus, a rearview camera image is shown
for the rearview camera* .
Off -
Whe n t he par king system is switched off,
only audib le signa ls are given.
Warning tones
Front volume - Vol ume for the front area
Rear volume - Vol ume fo r the rear area
Front frequency· Frequency for the front area
Rear frequency · Frequency for the rear area
Entertainment volume lowering - When t he
parking system is turned on, the volume of the
audio/video source is lowered .
The newly adjusted value is briefly heard from
the signal generato r.
@
Tips
- The warning tones can also be adjusted di-
rectly by the visual disp lay or the pictu re
from the camera. Simply press the Settings
control button.
- Changed settings are activated when the
parking system is switched on again.
- The settings for volume and frequency are
automat ically saved and assigned to the re-
mote control key being used.
Error
messages
Appl ies to vehicles: W ith parking system plu s/ rearview cam·
era/per ipheral cameras
There is an erro r in the system if the LED in the
Pw ,
button is bli nking and you hear a continuous
Parking
systems
alarm for a few seconds after switch ing on the
par king system or w hen the parking system is al·
ready activated. If the error is not cor rected be-
fo re you switch off the ignition, the LED in the
Pw ,
button wi ll blink the next time you switch on the
park ing system by shifting into reverse.
Parking system plus
If
a sensor is fa ulty, the
.l?4
symbo l will appear in
front of/behind the vehicle in the Infotainment
display. If a rear sensor is faulty, on ly obstacles
that are in areas @ and @ are shown
¢
page 114, fig. 120 .
If a front sensor is faulty,
only obst acles t hat are in areas © and @ are
shown. There is also a system ma lf unction if all
segme nts around the veh icle are red or if no seg·
me nts are disp layed.
Peripheral cameras*
There is a system malfu nction if t he
t8> •
symbol
appears and the corresponding disp lay area is
shown in bl ue. The camera is not wo rking in this
area.
Drive to an authorized Audi dealer or authorized
Audi Service Facility immed iate ly to have t he
malfunction corrected.
Trailer
hitch
Appli es to vehicles: wit h parking system pl us/rea rview cam -
era/periphera l cameras and t railer hitc h
For vehicles using the t railer socket, the park ing
system rear sensors do not tu rn on whe n you
shift into reverse gear or when you press the
Pw i
button. This results in the following restrict ions.
Parking system plus
There is no distance warning for the rear. The
front sensors remain activated. The visual display
switches to t he tra iler tow ing mode.
Rearview camera* /peripheral cameras *
There is no distance warning for the rear. The
front sensors remain activated . The visual display
switches to the tra iler towing mode. The rearview
camera image w ill not show the orientation li nes
and the blue surfaces.
.,,.
123

Advertisement

Table of Contents
loading

This manual is also suitable for:

S6 2016

Table of Contents