Table of Contents
Advertisement
4 WF-15 board
H WIPE (width of wipe pattern) volume
When the WIPER MODE selector is set to FIX, the horizontal
length of the wipe pattem is changed.
-____—----—-~ PAIRING selector
Select the line width of pairing wipe by designating the
number of the scanning lines.
3H: 3scanninglines
2H: 2scanninglines
4H: 4scanning lines
NAM WP (NAM wipe) switch
ON:
Comers of the wipe pattern will be rounded.
OFF:
Standard wipe pattem is obtained.
Fe
Durthg the extemal key operation, mask the blanking pulse of
the black and white camera connected to the EXT KEY
connector if it appears.
|
+] poe
e KEY MASK (extemal key mask) contro! volume
NOR: The pattem of the standard widthheight ratio is
When the wipe pattem is extremely
obtained.
changed from the standard, the
FIX: The width/height ratio of the wipe pattern can be
changed. Adjust the ratio by the H WIPE and V WIPE
|
WIPER MODE selector ————____.__ eee
eee
Note
volumes.
|
V WIPE (height of wipe pattern) control volume
When the WIPER MODE selector is set to FIX, the vertical
length of the wipe pattern is changed.
58
screen may not be wiped completely.
Advertisement
Table of Contents
