The picture on the preset monitor will be the next program
picture. The picture can be checked on the preset monitor.
Program monitor
_ Preset monitor
1 Set the PGMIPST selector to PST.
2 Selecta desired picture by pressing a PST bus select
button
The pressed button lights, and the selected picture
appears on the preset monitor.
3 Press the TAKE button.
Bike pictures on the preset monitor and program monitor
-- are interchanged; and the indication.of-the- PGM - -.—.---
indicator and the PST bus select button are also
changed.
Repeat steps 2 and 3 to continue the cut operation.
* The PGMIPST MIX lever should be set at either end, or the
pictures on the preset monitor and program monitor are
mixed.