Sony SEG-2550 Operating Instructions Manual page 50

Hide thumbs Also See for SEG-2550:

Table of Contents

——————

SHADOW selector

WIDE: To produce a wide shadow to the downstream

keying signal.

OFF:

Noshadow

NARROW:

To produce a narrow shadow to the downstream

keying signal.

* When the letters are inserted by a microcomputer, the

shadow Is not added.

PST CUT IN/OUT button

Press to cut in or cut out the keying signal! on the picture on

the preset monitor to check the downstream keying. The

button lights when the letters are inserted. When the button is

pressed again, the letters disappear and the button light goes

out.

INSERT lever

;

Move the lever to INSERT position to gradually insert the

letters to the program picture and move the lever to PGM

position to remove the letiers. At the PGM position no letter

will appear. When the letters are inserted, the PGM CUT

IN/OUT button lights.

PGM CUT IN/OUT button

Press to cut in orcut out the letters to the program picture.

nm ts

The-button lights when the letters.areinserted:--

Table of Contents

Seg-2550p