Table of Contents
Advertisement
PGMIPST
select section
PGM (program) indicator
The number of the picture which is supplied from the PGM
OUT connector (program picture) lights. The program picture
is selected by the PST bus select buttons.
When the BACKGROUND button is pressed, the setting of
the BACKGROUND switch is indicated: When the EFF button
is pressed, the EFFECTS
indicator lights while the
designated effect is being executed.
PST (preset) bus select buttons
Select the output signal from the PGM and PST OUT
connectors when the PGM/PST selector is set to PGM. The
pressed button and the corresponding PGM indicator light.
When the selector is set to PST, select the output signal from
the PST OUT connectors. The pressed button lights.
The buttons 1 through 8 correspond to the VIDEO IN 1
through 8 connectors on the connector panel. When a button
is pressed, the picture connected to the corresponding
connector is selected.
When the BACKGROUND button is pressed, the signal
generated by the built-in background color generator is
selected. The color of the background is adjusted by the
BACKGROUND selector and the BACKGROUND COLOR
stick and LUM control.
;
eae
PGMIPST selector
PGM:
The output signals from the PGM OUT and PST OUT
connectors are simultaneously selected by the PST bus
select buttons.
PST: The output signal from the PST OUT connectors is
selected by the PST bus select buttons.
EFF button
Press to use the effect selected by the EFFECTS SELECT
buttons.
BACKGROUND selector
Selects the background color when the BACKGROUND
button of the PST bus select buttons is pressed.
WHT:
White background
COL: Color background selected by the BACKGROUND
COLOR stick
BLK:
Black background
52
Advertisement
Table of Contents
