Table of Contents
Advertisement
JISPLAY OF E-File DATA
'or the E-File operation, connect a monitor to DSP OUT
onnector to display the data of the E-File (this is called a
isplay monitor). The data of the E-File can also be displayed
n the preset monitor by setting the INDICATION selector to
ISP. (On the preset monitor, some mode cannot be
isplayed. So the use of the display monitor is
xcommended)
/hen the power is tumed on, "WELCOME TO SEG-2550" is
isplayed on the display monitor. To display the data of the
-File, press the C key of the E-File section. (The E-File data is
isplayed approximately 10 seconds after the unit power is
imed on.) The data of an E-File.is composed of three pages.
> change the displayed page, press the! key. Every time the
«ey is pressed, the following page is displayed, and at page
the display is returned to page 1.
wee events are displayed at a time. To display the event
hich is not displayed, press the < key or — key.
Before the SEG-2550/2550P is.operated for the first time or
if it has been turned off for a fong time, wrong data may
exist in the E-File memory.
Be sure to erase all events before E-File operation. (Refer
to "TO ERASE DATA.") .
DATA ON PAGE 1
' (1)Page number
@ Remained transition memory
(@) Event number
(4 Transition time in frame numbers
(5) TR-VR (levers and sticks used in the event)
PiP: PGMI/PST MIX lever
EFF:
EFF lever
DSK:
INSERT lever
POS:
POSITION stick
BG-C:
BACKGROUND COLOR stick
BG-Y:
LUM contorol of BACKGROUNDCOLOR
CM-C: COLOR MATTEstick
;
CM-Y:
LUM control of COLOR MATTE
BIS: SOFTNESS/BORDER control
(©)PGM (picture selected on.the program bus)
()PST (picture selected on the preset bus)
EFF: The EFF button of the PST bus select buttons is
pressed.
1-8: The button of the PST bus select buttons
corresponding to the indicated number is pressed.
WHT:
The BACKGROUND selector of the PST bus select
"section is set to WHT.
COL: The BACKGROUND selector of the PST bus select
section is set to COL.
BLK: The BACKGROUND selector of the PST bus select
section is set to BLK.
:
(8) A (picture selected on the A bus)
(9) B (picture selected on the B bus)
1-8: The button of the A bus or B bus select buttons
corresponding to the Indicated number is pressed.
WHT:
The BACKGROUND selector of the A bus or B bus
select section is set to WHT.
COL: The BACKGROUND selector of the A bus or B bus
select section is set to COL.
BLK: The BACKGROUND selector of the A bus or B bus
select section is set to BLK.
3t
OPERA
USING
"E-File
222
Advertisement
Table of Contents
