Lenovo 7DCE Messages Manual page 61

Hide thumbs Also See for 7DCE:
Table of Contents

Advertisement

Information only; no action is required.
• FQXSPIO4001I: GPU Board Status was changed by [arg1] of [arg1].
This message is for the use case where GPU Board Status was changed.
Severity: Warning
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0276
User Action:
Information only; no action is required.
• FQXSPIO4002I: GPU Board Status was recovered by [arg1] of [arg1].
This message is for the use case where GPU Board Status was changed.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0277
User Action:
Information only; no action is required.
• FQXSPMA0001I: Error Detected and Corrected for [PhysicalMemoryElementName] on Subsystem
[MemoryElementName].
This message is for the use case when an implementation has detected a Memory corrected error.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID:
CIM Prefix: PLAT CIM ID: 0124
User Action:
Information only; no action is required.
• FQXSPMA0002N: Configuration Error for [PhysicalMemoryElementName] on Subsystem
[MemoryElementName].
This message is for the use case when an implementation has detected a Memory DIMM configuration
error has been corrected.
Severity: Error
Serviceable: Yes
Automatically notify Support: No
Alert Category: Critical - Memory
SNMP Trap ID: 41
CIM Prefix: PLAT CIM ID: 0126
User Action:
.
Chapter 2
XClarity Controller events
57

Advertisement

Table of Contents
loading

This manual is also suitable for:

Thinksystem st250 v37dcf

Table of Contents