List Of Xclarity Provisioning Manager Events - Lenovo 7DCE Messages Manual

Hide thumbs Also See for 7DCE:

page of 200

/ 200
Contents
Table of Contents
Bookmarks

Table of Contents

Table 4. Events organized by severity (continued)

Message String

Event ID

FQXPMSD0002M

A fatal error or unknown test error occurred while the device was

executing its self-test

FQXPMSD0003M

self-test completed having a test element that failed and the test

element that failed is not known.

FQXPMSD0004M

self-test completed having the electrical element of the test failed.

FQXPMSD0005M

self-test completed having the servo (and/or seek) test element of the

test failed.

FQXPMSD0006M

self-test completed having the read element of the test failed.

FQXPMSD0007M

Hard Drive(s) not found

FQXPMSD0008M

UEFI is not ready for LXPM to send command to test hard drive.

FQXPMSD0009M

Device error detected when LXPM sent a test command to a hard

drive.

UEFI timed out when LXPM sent a test command to a hard drive.

FQXPMSD0010M

FQXPMSD0011M

The hard drive is not supported by uEFI while LXPM send command

to test hard drive.

FQXPMSR0021L

Failed to create new virtual disk.

FQXPMSR0031L

Failed to remove existing virtual disk

FQXPMUP0201M

BMC communication failed: EMMC2USB mount failure. Failed to

update the firmware

FQXPMUP0202M

Transfer the update package error. Failed to update the firmware

FQXPMUP0203M

BMC communication failed: EMMC2USB unmount failure. Failed to

update the firmware

FQXPMUP0204M

BMC communication failed: Execute the update cmd failure. Failed to

update the firmware

FQXPMUP0205M

BMC communication failed: Get the update status failure.Failed to

update the firmware

FQXPMUP0206M

The level of the update package is too old. Failed to update the

firmware.

FQXPMUP0207M

The update package is invalid. Failed to update the firmware.

FQXPMUP0208M

Failed to execute reboot BMC command