Lenovo 7DCE Messages Manual page 160

User Action:
Complete the following steps:
1. Reseat the affected DIMM.
2. Check Lenovo Support site for an applicable service bulletin or firmware update that applies to this
memory error.
3. If the problem persists, collect Service Data logs and contact Lenovo Support.
Note: The solution for this error may involve a system board replacement. If TPM encryption has
been enabled, back up TPM Encryption Recovery Key.
• FQXSFPU0016N: A processor within the system has failed the BIST.
Severity: Error
User Action:
Complete the following steps:
1. If the processor or firmware was just updated, check the Lenovo Support site for an applicable
service bulletin or firmware update that applies to this processor error.
2. If the problem persists, collect Service Data logs and contact Lenovo Support.
• FQXSFPU0017G: A processor microcode update failed.
Severity: Error
User Action:
Complete the following steps:
1. Check Lenovo Support site for an applicable service bulletin or firmware update that applies to this
processor error.
2. If the problem persists, collect Service Data logs and contact Lenovo Support.
• FQXSFPU0018N: CATERR(IERR) has asserted on processor [arg1].
Severity: Error
Parameters:
[arg1] Socket number, 1-based
User Action:
Complete the following steps:
1. Check Lenovo Support site for an applicable service bulletin or UEFI firmware update that applies to
this processor error.
2. Power off the system and remove A/C power.
3. Restore A/C power and power on the system.
4. Determine if there have been recent changes to the hardware, firmware or operating system. Reverse
them if possible
5. If the problem persists, collect Service Data logs and contact Lenovo Support.
Note: The solution for this error may involve a system board replacement. If TPM encryption has
been enabled, back up TPM Encryption Recovery Key.
• FQXSFPU0019N: An uncorrectable error has been detected on processor [arg1].
Severity: Error
Parameters:
156
ThinkSystem ST250 V3 Messages and Codes Reference