Lenovo 7DCE Messages Manual page 13

Table 2. Events organized by severity (continued)
Message String
Event ID
FQXSPDM4003I TKLM servers set by user [arg1]: TKLMServer1=[arg2] Port=[arg3],
TKLMServer2=[arg4] Port=[arg5], TKLMServer3=[arg6] Port=[arg7],
TKLMServer4=[arg8] Port=[arg9].
FQXSPDM4004I TKLM servers device group set by user [arg1]:
TKLMServerDeviceGroup=[arg2] .
FQXSPDM4005I User [arg1] has generated a new encryption key pair and installed a
self-signed certificate for the TKLM client.
FQXSPDM4006I User [arg1] has generated a new encryption key and certificate
signing request for the TKLM client.
FQXSPDM4007I User [arg1] has imported a signed certificate for the TKLM client from
[arg2].
FQXSPDM4008I User [arg1] has imported a server certificate for the TKLM server.
FQXSPDM4009I User [arg1] has [arg2] file [arg3] from [arg4].
FQXSPDM4010I Inventory data collecting and processing complete for [arg1],
sequence number is [arg2].
FQXSPEA2001I Sensor [SensorElementName] has deasserted the transition from
normal to non-critical state.
FQXSPEA2002I Sensor [SensorElementName] has transitioned to a less severe state
from critical.
FQXSPEA2003I Link up is detected on port [arg1] of the PCIe device [arg2].
FQXSPEM0003I The Log [RecordLogElementName] has been cleared.
FQXSPEM0004I The Log [RecordLogElementName] is full.
FQXSPEM0005I The Log [RecordLogElementName] is almost full.
FQXSPEM0009I The System [ComputerSystemElementName] has generated an
auxiliary Log Entry in Log [RecordLogElement].
FQXSPEM4000I The [arg1] on system [arg2] cleared by user [arg3].
FQXSPEM4001I The [arg1] on system [arg2] is 75% full.
FQXSPEM4002I The [arg1] on system [arg2] is 100% full.
FQXSPEM4003I LED [arg1] state changed to [arg2] by [arg3].
FQXSPEM4004I SNMP [arg1] enabled by user [arg2] .
FQXSPEM4005I SNMP [arg1] disabled by user [arg2] .
FQXSPEM4006I Alert Configuration Global Event Notification set by user [arg1]:
RetryLimit=[arg2], RetryInterval=[arg3], EntryInterval=[arg4].
FQXSPEM4007I Alert Recipient Number [arg1] updated: Name=[arg2],
DeliveryMethod=[arg3], Address=[arg4], IncludeLog=[arg5], Enabled=
[arg6], EnabledAlerts=[arg7], AllowedFilters=[arg8] by user [arg9] from
[arg10] at IP address [arg11].
FQXSPEM4008I SNMP Traps enabled by user [arg1]: EnabledAlerts=[arg2],
AllowedFilters=[arg3] .
FQXSPEM4009I The UEFI Definitions have been changed.
Severity
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
.
Chapter 2 XClarity Controller events
9