Lenovo 7DCE Messages Manual page 53

Hide thumbs Also See for 7DCE:
Table of Contents

Advertisement

Bare Metal Connection process has been started
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0143
User Action:
Information only; no action is required.
• FQXSPFC4001I: The bare metal update application reports a status of [arg1].
Bare Metal Update Application Status
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0144
User Action:
Information only; no action is required.
• FQXSPFC4002I: System running in setup.
System running in setup
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0193
User Action:
Information only; no action is required.
• FQXSPFC4003I: UEFI deployment boot mode is enabled for NextBoot.
UEFI deployment boot mode is enabled for NextBoot
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0197
User Action:
Information only; no action is required.
• FQXSPFC4004I: UEFI deployment boot mode is enabled for NextAc.
UEFI deployment boot mode is enabled for NextAC
Severity: Info
Serviceable: No
.
Chapter 2
XClarity Controller events
49

Advertisement

Table of Contents
loading

This manual is also suitable for:

Thinksystem st250 v37dcf

Table of Contents