Lenovo 7DCE Messages Manual page 25

Hide thumbs Also See for 7DCE:
Table of Contents

Advertisement

Table 2. Events organized by severity (continued)
Message String
Event ID
FQXSPSE4063I
The system guard configuration is updated: status=[arg1], hardware
inventory=[arg2] and action=[arg3] by user [arg4] from [arg5] at IP
address [arg6].
FQXSPSE4064I
SNMPv3 engine ID is changed from [arg1] to [arg2] by user [arg3] from
[arg4] at IP address [arg5].
FQXSPSE4065I
SFTP [arg1] by user [arg2] from [arg3] at IP address [arg4].
FQXSPSE4066I
Cryptographic mode is modified from [arg1] to [arg2] by user [arg3]
from [arg4] at IP address [arg5].
FQXSPSE4067I
User [arg1] accessible interfaces is set to [arg2][arg3][arg4][arg5][arg6]
by user [arg7] from [arg8] at IP address [arg9].
FQXSPSR2001I
Sensor [SensorElementName] has deasserted the transition to non-
recoverable from a less severe state.
FQXSPSS4000I
Management Controller Test Alert Generated by [arg1].
FQXSPSS4001I
Server General Settings set by user [arg1]: Name=[arg2], Contact=
[arg3], Location=[arg4], Room=[arg5], RackID=[arg6], Rack U-
position=[arg7], Address=[arg8].
FQXSPSS4002I
License key for [arg1] added by user [arg2].
FQXSPSS4003I
License key for [arg1] removed by user [arg2].
FQXSPSS4004I
Test Call Home Generated by user [arg1].
FQXSPSS4005I
Manual Call Home by user [arg1]: [arg2].
FQXSPSS4006I
Call Home to [arg1] failed to complete: [arg2].
FQXSPSS4007I
The BMC functionality tier is changed from [arg1] to [arg2].
FQXSPSS4008I
The [arg1] setting has been changed to [arg2] by user [arg3].
FQXSPSS4009I
System enters LXPM maintenance mode.
FQXSPSS4010I
Test Audit Log generated by user [arg1].
FQXSPSS4011I
Fan speed boost setting is changed from [arg1] to [arg2].
FQXSPTR4000I
Management Controller [arg1] clock has been set from NTP server
[arg2].
FQXSPTR4001I
Date and Time set by user [arg1]: Date=[arg2], Time-[arg3], DST Auto-
adjust=[arg4], Timezone=[arg5].
FQXSPTR4002I
Synchronize time setting by user [arg1]: Mode=Sync with NTP Server,
NTPServerHost1=[arg2]:[arg3],NTPServerHost2=[arg4]:[arg5],
NTPServerHost3=[arg6]:[arg7],NTPServerHost4=[arg8]:[arg9],
NTPUpdateFrequency=[arg10].
FQXSPTR4003I
Synchronize time setting by user [arg1]: Mode=Sync with server
clock.
FQXSPUN0009I
Sensor [SensorElementName] has asserted.
FQXSPUN0017I
Sensor [SensorElementName] has transitioned to normal state.
FQXSPUN0026I
Device [LogicalDeviceElementName] has been added.
Severity
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
.
Chapter 2
XClarity Controller events
21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Thinksystem st250 v37dcf

Table of Contents