Advertisement
8-2. Digital / Film Settings
Depending on the type of camera to be used, select either "Digital" or "Film" mode
in the main menu of [
Please refer to "5-2. Digital / Film Settings" (See P10).
8-3. Selecting Flash Measurement
Range
Toggle the range (G/T) corresponding to your flash output power by selecting
[
- Jin the Main Menu.
Please refer to "6-6. Selecting Flash Measurement Range (Flash Modes Only)" (See P28).
8-4. Preset White Balance/Color Compensation
You can set a preset color temperature (digital only), LB index compensation,
or CC index/filter number compensation in Presets No. 1 to 19. During
measurement, you can recall and use the values saved in a Preset Number.
Also, each Preset Number can be given a name of up to 8 characters.
The meter has been calibrated to Sekonic standards, however if the indicated
compensating values do not yield the desired or expected color reproduction,
than it will be necessary to modify the filter compensation values.
In this case, if you save the compensation values in memory as a preset
number and then take measurements, you can display results with the
compensated values.
Also, because you can set your digital camera's preset color temperature as a
stored preset value, even if you do not input a selected color temperature, you
can recall and use your preset color temperature when taking measurements.
Digital | Preset Name
Preset color,
: CC index
LB index
:
temperature
=>
compensation amount | gay} compensation amount
:
bid Setting range:
: | Setting range:
(units: MK!)
:
2,500 to 10,000K
:
|40G to 40M
Setting range:
ee
A
-100 to +100 MK
1: When a preset color temperature is not set, all
of the indicated values will be compensated.
When a preset color temperature has been set,
:
only the stored preset values will be corrected.
: | CC filter number
LB index
:
Film
Preset Name
: | compensation amount
compensation amount | :
4
= Setting range:
4
(units: MK"1)
:" | 100G to 100M
Setting range:
-100 to +100 daMK-1
These preset compensation are applied
to the measurement of LB/CC indexes or
LB/CC filter numbers
36
Advertisement
