Advertisement
7 Other Functions
7-1. Memory (4) Function
This function offers an accurate way to
D
oš
measure the uniformity of the multiple light
55
mB RA m
oe
sources.
es
ce
3g
After taking an initial measurement to establish
35
2
a standard color temperature value (ex. main
light), it is possible to compare the differences
between the standard measured value and the
$
new measured value (ex. color temp value shift
O_O
from main light to fill light). This Memory(4)
function can be used in every display mode.
O
O
1) Measure the area of the light source that you
A
want to use as a standard by pressing the
Measuring/OK button E.
2) Press the Memory (A)/BACK button I to save the standard values in
memory.
In the lower left of the screen, the letter "M" will blink to indicate that the
meter is in Memory mode.
3) At the location to be used for comparison, press and hold the
Measuring/OK button E.
While the Measuring/OK button EA is being pressed, the difference
between the standard measurement and comparison measured values
will be displayed.
Memory Mode screen (Standard measurement)
Memory display screen
Hold the
[Fr]
Measuring/OK
m}
k
IM
button
DIGITAL
DIGITAL
=
ie "M" is blinking
@If the Measuring/OK button W is released, the value saved in memory in step 2) will be
displayed.
4) To clear the Memory (4) mode, Press the Memory (4)/BACK button IH
again.The letter "M" disappears and the display returns to the normal
measurement screen.
31
Advertisement
