Sekonic PRODIGI COLOR C-500R Operating Manual page 19

Hide thumbs Also See for PRODIGI COLOR C-500R:

@Simplified illuminance in ambient light mode

Select this display when you measure the brightness

of a continuous light source. The measurement

will be displayed as Ix (Lux) or FC (Foot-candle) as

selected in the custom settings mode (See P 41)

(Note )

llluminance Measurement

( Display in lux)

@The simplified illumination values display the first 3 digits of the measurement values, and is

used as a reference for consistent light amount in photography, video or cinematography

applications. It is not recommended to use for actual exposure values or calibration purposes..

@1 MK" is equivalent to 1 Mired. (See P47)

@The unit of "MK?" is now used based on the International System of Units (SI) The latest unit

is adopted to Prodigi Color C-500R/500.

5-5. Setting the Selected Color Temperature

A target color temperature (Kelvin number) can be set according to your

color balancing needs. After setting, indicated value for either LB/CC filter

number display or LB/CC index display mode will display the filtration

needed to achieve the target color balance. The selected color

temperature is displayed in the upper right hand corner of the LCD screen.

@The selected color temperature will not be displayed and

cannot be changed if the display mode is showing the meas-

ured color temperature or simplified illuminance values.

While pressing the SET K button J, turn the Jog

wheel El to set the selected color temperature.

DIGITAL efik

Measurement

screen

wn BEF hh

LB Index + CC index

mDtk

SCHE]

FILTER

E 224m

Bor

Een

SET K Button

Table of Contents

Prodigi color c-500