Advertisement
A Turning the Power On
4-1. Power ON/OFF
Power ON:
Press the POWER button El.
The meter will turn on and the LCD screen
i,
=
will display "Wait..." while the meter runs a
self-test. Once the self-test is completed the
LCD screen displays the measuring screen.
Depending on the mode selected, the
Or
er
"EET or "DIGITAL" icon will blink for about
2
3
5 seconds.
P
uly
Power OFF: Press and hold the POWER button El in for
ee
1 second or longer and the meter will turn off. POWER button EI
(Note )
@Please wait 3 seconds between repeated power on and power off sessions.
@If the LCD screen shows no display, check the battery capacity indicator (See Section 4.2 -
Checking the Battery Capacity below). Also check for proper battery insertion (Pos/Neg
positioning).
@ All settings and measurements made during use are saved in memory even after the meter is
powered off.
4-2. Checking the Battery Capacity
When the power is turned ON,
he LCD
ill sh
[Reference]
the
Screen u = owa
@When the batteries are out of power and the
battery capacity indicator.
meter is turned ON, the LCD screen will appear
and then turn off immediately. This is an
IWA, Sufficient battery power
indication that the batteries are depleted and they
should be replaced immediately. Having spare
remaining.
batteries on hand is recommended.
CE L
batt
@When the meter is continuously used at room
ow
battery power
temperature, the battery life with alkaline
remaining.
Have a spare
batteries should last 12 hours (based on our
testing).
Erz
battery ready
@Due to temperature and length of time stored, the
a
| When
the indicator blinks,
batteries included with this meter may have a
TTS
shorter live span.
replace the battery
immediately.
Advertisement
