Auto Power Off Function; Setting Iso Film Speed - Sekonic Flashmate L-308S Operating Manual

3. Before Using

5. Auto Power OFF function

1) To conserve battery power, the meter will turn OFF about four minutes after
last use.
2) Whether the Auto Power OFF function turns the power OFF or the Power
button q is pressed, the settings and measured values remain stored in
memory. When the Power button is pressed again the last settings are
displayed.
REFERENCE: • The power shuts OFF automatically after one minute when the

6. Setting ISO film speed

1) Hold down the ISO button i and press
either the Up button y or Down
button u to select ISO film speed for
the film being used.
2) You can also change the ISO film speed
after taking measurements. The new
value is automatically displayed.
REFERENCE: • Setting value will change consecutively if the Up button or
power button is pressed and held.
Down button is depressed for one second or longer.
ISO