Advertisement
7) The cursor will be blinking in the first character
nera. OCULK
space of the preset name, and you can name
the preset (maximum of 8 characters). (You
can skip this step if you do not want to name
the preset. Press the Measuring/OK button
and proceed to step 8.)
1. Turn the Jog wheel El to select the desired
Blinking cursor
character.
@Usable characters are upper- and lower-
case letters, numbers, blank spaces, and
the symbols: "@", "-( hyphen)" ,
"(comma)" and ".(period)".
z
@Press the DISPLAY Selecting button El to
E
toggle between upper- and lower-case
P
letters.
=
2. Press the SET K Button I] to move the
MODE Put "A/a" at the right of E
cursor one space right. (Press the MODE
Butoni
SET K Button N &
button E to move the cursor one space left.)
E
3. Repeat steps 1 and 2 to continue entering characters.
Jog wheel EI
SET K Button
Measuring/
OK button
Confirm
4. Press the Measuring/OK button EA to confirm the preset name.
in "Digital" mode:
The preset color temperature value will start to
blink. (Proceed to the next step of 6).)
in "Film" mode:
The CC filter number value will start to blink.
(Proceed to step of 7).)
8) The preset color temperature value will be
blinking. (in "Digital" mode only). Turn the Jog
wheel Ell to select the preset color temperature
and press the Measuring/OK button RA to
confirm. (The CC index value will start to blink.)
Nate )
@When a preset color temperature is not set, all of the indicated values will be compensated.
When a preset color temperature has been set, only the stored preset values will be corrected.
38
Advertisement
