Advertisement
7 | Preset Number / Memory (4) Display
PRESET if Displayed when selecting Preset White Balance/Color Compensation function.
(Shows preset number from 1 to 19.) (See P16)
M
Blinks when the Memory (4) function is being used. (See P31)
EI Preset Name, Menu Name, Illuminance Units (Dot Matrix Display)
Dot Matrix characters appear under the following conditions:
1.In Menu Modes - Displays Menu names.
2.While White Balance/Color Compensation is being selected - Displays Preset name.
3.Simplified Illuminance Modes - Displayed only when Lux or Foot-Candle (ambient
light) measurement values are selected in the Custom Settings.
EI LB Values, Color Temperature Values, Wireless Radio
Triggering Mode Channel Setting (C-500R only)
Depending on the Display Mode, LB index, LB filter number, measured color temperature,
or Wireless radio triggering mode channel settings (C-500R only) are displayed.
The simplified illuminance Mode only displays when Lux or Foot-Candle (ambient light)
measurement values are selected to display in the custom settings mode.
In case of an out of display range or out of measurement range error, [iader] or [Auer]
appears. (See P29)
Under Displayed if value is lower than display range.
Blinks if value is lower than measurement range (too dark) or color temperature
value is too low.
Duer
Displayed if value is higher than display range.
Blinks if value is higher than measurement range (too bright) or color temperature
value is too high.
CC Value Display (See P12)
Depending on the selected display mode, either the CC Value, Index or CC filter number is displayed.
If the measured value exceeds the display range, an out of display range Icon [U] or [O]
appears (See page 29)
LI
Displayed if value is lower than display range.
Blinks if value is lower than measurement range (too dark) or color temperature
value is too low.
Displayed if value is higher than display range.
Blinks if value is higher than measurement range (too bright) or color temperature
value is too high.
Wireless Radio Triggering Mode Channel and Quad-triggering
Zone Setting Display (C-500R only) (See P23)
Displayed during Wireless Radio Triggering Mode
For channels 1~16, displays selected main channel.
For channels 17~32, displays selected main channel (17~32) and
Selective Quad Triggering zones (A~D).
Automatic Electro-Luminescent (EL) Backlight on LCD screen
If the lighting conditions are dark (approx. EV6, 160lx, 15FC or darker), the LCD screen will automatically illuminate when the
Measuring/OK button is pressed. While making or waiting for Cordless flash mode or Wireless radio triggering mode, the
LCD screen will not automatically illuminate to avoid interference with the measurement.
The LCD backlight will automatically turn off after 20 seconds if none of the buttons have been pressed. If it becomes
necessary to illuminate the LCD backlight, cover the Light receptor (with your hand) and press the MODE button to turn it on.
<Note>Due to the function of EL, it may emit a small typical sound, however, it is not functional default, and no problem as
feature.
5
Advertisement
