Advertisement
6-4. Measurement in Cord Flash Mode %)
In the Cord Flash Mode, the meter and flash unit are connected with a Sync
Cord (optional accessory). The Cord Flash mode is preferable when lighting
conditions prevent the use of cordless measurements or when certain types of
equipment requires a physical sync connection.
1) Depending on what type of camera is being
used, select "Digital" or "Film" mode (Press the
MENU button El and select the
"}] menu) (See P10)
[E
2) While pressing the MODE button E, turn the
Jog wheel Ill to select the že Cord Flash
Mode.(See P11)
3) Select the Display Mode. Press the DISPLAY
Selecting Button E, to select the desired
Display Mode. (See P12)
4) Set the selected color temperature. While press-
ing the SET K button I, turn the Jog wheel E
to set the target color temperature (See P14)
[Reference]
@ If you are only using the selected color temperature dis-
play mode, you can omit this step.
5) Turn the Jog wheel El to set the shutter speed.
(See P15)
Chate )
uong
YO
/Öuunseayy
—_
wu
RANGE
E
2
=
2
3
k
H
D
X
q
o
A
2, GH || $
i
| || &
MODE
ENU
SET K a
Button EI Butte nf Button
=
a
Synchro Terminal
@Select a shutter speed range that will synchronize with your camera and flash system.
6) Connect the flash sync cord (optional) to the
meter's sync terminal il.
21
Advertisement
