Advertisement
5-7. Selecting Preset White Balance/Color Compensation
There are 19 selectable Preset White Balance/Color Compensation values that
you can preprogram to bias readings for specific digital camera or film
characteristics or light sources and recall and apply the presets anytime you
need them. You can input a simple alpha-numeric name for the preset you
create to make it easier to identify. Preset values can not be set or changed
while the meter is in color temperature or simplified illumination display modes.
O(Note )
@Make sure the Preset number to be used is selected in advance.
@For information on how to save presets, see P37.
1) While pressing the PRESET button E, turn the
Jog wheel E to select the preset number.
(Preset name will be displayed when it is entered
in advance.)
mm Gh h feh
om
ICU)
M
cc
I
I
MK
The preset numbers cycle as follows: Preset
number 1 © 2 © ~ © 19 ©"Blank (no preset)"
© 1 ©,
with the values of each preset
displayed.
E aym
Bor
T
Preset color temperature of a selected
preset stored (Digital mode only)
Eluonng
135344
nny
DIGITAL
CHEN
ACC compensation
value of a selected
preset number
ALB compensation
value of a selected
preset number
When the measured color temperature
or simplified illuminance is displayed,
on the LCD screen, stored preset names
2) Release the PRESET button B.
and location numbers are not shown.
Preset White Balance/ Color Correction values stored can be recalled and applied during color measurements. These stored
Preset values adjust the meter readings to your preferences based on LB index and CC index/filter number units independently.
f
Name of Preset value stored
Preset number
Chote )
[Reference]
® Any preset color temperature saved as preset
@lIn the measurement screen, while the
values will override the selected color
PRESET button E is being pressed, the
temperature. (Digital mode only)
preset values are displayed.
16
Advertisement
