Advertisement
As an example, this is how to set the T step (shutter speed step). Setting
any other item follows the same procedure.
1) Press the MENU button Bl to enter the Main Menu. (The menu name is
shown in the dot matrix display.)
2) Turn the Jog wheel E to select [ELS
ale
3) Press the Measuring/OK button E to rm,
4) Turn the Jog wheel El and select [7
(IT 2
"JOLE
Jono
al
The custom setting name [
] is shown in the dot matrix display,
and a number (0, 1, 2) being set to the current T step value is displayed
above.
5) Press the Measuring/OK button E.
The current setting item number will blink. In the example, "0" is blinking
and "1 step" is displayed.
6) Turn the Jog wheel El to select the desired item name and number, and
press the Measuring/OK button EA to confirm.
The display returns to step 3).
7) Repeat steps 3)~5) to set other items as desired.
8) Press the MENU button [I to return to the measurement screen, or press
the Contrast(A)/BACK button IM to return to the previous screen.
] from the sub-menu1
Main Menu screen
Sub-menu1
screen
Confirm
Confirm
Confirm
Blinking
43
Advertisement
