Sekonic PRODIGI COLOR C-500R Operating Manual page 24

6-3. Measurement in Cordless Flash Mode {2}
In Cordless Flash Mode, the meter will go into a standby mode (when the
measure button is pressed) to wait for a burst of flash to measure. Cordless
Flash Mode is preferable when the flash to subject distance is too far to use a
sync cord or when wireless measuring is desired.
1) Depending on what type of camera is being used,
select "Digital" or "Film" mode. (Press the MENU button
El and select the [ ff] menu) (See P10)
2) While pressing the MODE button E, turn the
Jog wheel El, to select the P Cordless Flash
uong YO
/Bulunseayy
Elissum Bor
Mode. (See P11) = og 7% )
3) Select the Display Mode. m x
Press the DISPLAY Selecting Button El to select 7 5 Ò 113
the desired Display Mode. (See P12) 3 ( Q ) >
4) Set the selected color temperature. While oO a 7 C 2
pressing the SET K button I, turn the Jog pe LA 3
wheel E to set the target color temperature. MODE MENU SETK &
(See P14)
Button E Button E Button =
B
@If you are only using the selected color temperature
display mode, you can omit this step.
5) Turn the Jog wheel E to set the shutter speed. (See P15)
(Note )
@Select a shutter speed range that will synchronize with your camera and flash system.
19