Mercedes-Benz GLE 2022 Operator's Manual page 543

To issue a signal when approaching: activate
#
Visual warning and Acoustic
Resetting the POI symbol display
In the menu, select Reset POIs.
#
The settings are reset to the standard set-
tings.
▌Selecting the display of additional information
on the map
Multimedia system:
© Navigation
4 5 5
Select View.
#
Select Show additional information.
#
Switch the options on or off.
#
The following options are available:
Current street
R
If the option is enabled, it will be displayed in
the navigation window.
Scale
R
If the option is switched off, the map scale is
only displayed on the map when zooming.
If the option is enabled, the map scale is per-
notification. manently displayed on the map.
The option also influences the display on the
driver's display.
Altitude
R
Next junction
R
If the option is switched on and the journey
continues without route guidance, the name of
the next intersecting street will be displayed in
the navigation window.
Z
▌Displaying the map version
Multimedia system:
©
4
Select View.
#
Select
#
The detail information is displayed.
%
The online map update service from
Mercedes me connect can be used to update
the map data (
A message is shown in the media display
when a new map version is available.
Navigation Z
5 5
Map data version.
page 36).
/
F167 0009 02
MBUX multimedia system 541
%
Information about new versions of the digital
map can be obtained from a Mercedes-Benz
service centre.
▌Overview of area avoidance on the route
You can define areas along a route that you would
like to avoid.
Motorways or multi-lane expressways that pass
through an area to be avoided may be included in
the route despite being blocked.
▌Avoiding a new area for the route
Multimedia system:
© Navigation
4 5 5
Avoid areas
5
Select Avoid new area.
#
Starting using the map
Select Using map.
#
A red rectangle appears. This designates the
area that should be avoided.
Move the map ( page 540).
/
#
Set the map scale ( page 539).
/
#
Z Route
5